Monitoring and Performance in Windows 7
Sometimes services, processes, and applications encounter problems and the chapter considers how you can deal with them. Sometimes the tools provided by the operating system are not exactly what you require, and the chapter looks at how you can create standard scripts to address any problems you encounter without requiring a high level of programming expertise.
You need to manage and configure services, configure page files and memory cache, configure services, manage processes, configure your desktop, and, if necessary, change your boot environment. The chapter discusses all these requirements.
Exam objectives in this chapter:
Configure performance settings.
Lessons in this chapter:
Lesson 1: Monitoring Systems
Lesson 2: Configuring Performance Settings
Before You Begin
To complete the exercises in the practices in this chapter, you need to have done the following:
Installed the Windows 7 operating system on a stand-alone client PC, as described in Chapter 1, “Install, Migrate, or Upgrade to Windows 7.” You need Internet access to complete the exercises.
Optionally installed Windows 7 on a second PC, as described in Chapter 6, “Network Settings.” A second computer is not required for the practice exercises but will enable you to complete the suggested practices at the end of this chapter.
If you have two physical computers that are not otherwise on the same network, you need to connect their Ethernet ports with a crossover cable or by using an Ethernet switch.
You need a universal serial bus (USB) flash memory device with at least 200 MB usable free space, or a second internal or external hard disk.
The computer you use for the practice exercises (Canberra) needs to have an optical drive that can write to DVD-ROM.